Upgrade your electric bike old front light to new front light | shuangye ebike
      1. <output id="eorvb"></output>
        1. 
          
          <output id="eorvb"></output>
            <dl id="eorvb"><font id="eorvb"></font></dl>
          1. 12 years Professional electric bike manufacturers

            logo-2logo-3

            News

            Upgrade your electric bike old front light to new front light

            Upgrade your electric bike old front light to new front light

            What is the different points between the old one and the new one? Actually, the front lights were upgraded to a 3W LCE front light with a mobile phone charging port. Now let us share the way and steps how to replace old front light to new frontlight.

            You can click on the link below and watch the?replace new front light video.

            https://youtu.be/xEFQRRl5d6E

            We take the A1-7 folding electric bicycle as an example. First we need to prepare a conversion connector, 10 cable ties, a winding tape, a new front light with cable, multi-tools and a screwdriver. And follow the steps below.

            Fold the electric bike up

            Unscrew the screws of fixing cover and remove it, then take out the controller

            Disconnect the old front light line

            Cut fixing cable ties and winding tape, pull the old front light line out of the frame

            Use 8 mm in the multi-tools and screwdriver unscrew the headlight bolt

            Remove the old front light

            Install the new front light and reserved for a length of 12 cm headlight line

            Wrap the lines and tie the lines to the frame with cable ties

            Take new line through the frame hole and from the rear pipe hole into the rear pipe, then take it out

            Just three steps to replace lines
            1.Disconnect the LCD display line plug of controller
            2.Connect the Conversion connector, one conversion line connect LCD display line plug and another is connected the new front light line plug
            3.Connect controller line plug and new front light line plug

            Connect the battery line plug

            Organize the controller lines and put it into frame, then screw the fixing cover, unfold back frame

            Fix lines with the fixing buckle and cable ties

            Turn on?the LCD to check its work situation

            If you want to a set new front light kit, please write down below or contact us freely.

            PersonalBusinessDistributor

            Prev:
            Next:
            海南4加1彩走势图
              1. <output id="eorvb"></output>
                1. 
                  
                  <output id="eorvb"></output>
                    <dl id="eorvb"><font id="eorvb"></font></dl>
                      1. <output id="eorvb"></output>
                        1. 
                          
                          <output id="eorvb"></output>
                            <dl id="eorvb"><font id="eorvb"></font></dl>